|
|
Creation of Knowledge Database for Lighting Technology with the Possibility of Expert Query Processing
Krbal, Michal ; Sokanský, Karel (referee) ; Gašparovský, Dionýz (referee) ; Baxant, Petr (advisor)
This presented thesis is focused on the complex description of creation the database system for the lighting. The important static and dynamic parameters of light sources and luminaires are listed in the first part of thesis. These parameters are complemented by the measured values and their relationships. The next chapters of thesis are focused to description of obtained parameters, structural design, historical and expected development of individual representatives of light sources. In the following sections are described current state of used data formats of luminaires and the possibilities for describing of light sources. The database systems are created as a result of this thesis. These databases are used for collecting, sorting, searching and sophisticate comparison of the parameters of light sources and luminaires.
|
|
|
Energy Optimization and Operation of Public Lighting
Houdek, Michal ; Škoda, Jan (referee) ; Baxant, Petr (advisor)
An objektive of this university graduation work is an essay about any possibilities for energy savings with operation optimalization of public lightings. Understandings and introduction operation problems of public lighting is devote in first part of this work. Here we can chapters as Importance of public lightings or Gulations and norms in ralation to public lightings. The bigist and special attention is concentrated to description to public lightings systems and it is basic components. Another main part of this work is demonstration of used systems that are leading to energy savings for public lightings. These problems are detailed and explained in chapter Regulation of public lighting systems. This graduation work is describing individual types of regulation with the systems that are used with these regulatios in systems of public lightings. The assignment of last part of graduation work was to make sample calculation of energy demand and calculatin of yearly consumption on exemplary temporary system of public lightings. For this occasion was extra special auxiliary application sytem set up inside the Microsoft Excel program where all individual calculations were done.
|
|
|
Photobiological safety evaluation of light sources for household use
Jelínek, Jakub ; Motyčka, Martin (referee) ; Štěpánek, Jaroslav (advisor)
This thesis deals with the photobiological safety of light sources used for household lighting. The theoretical part of the thesis is devoted to areas related to photobiological safety, such as the basic description of vision functions, the description of light sources, as well as methods of measurement and evaluation. In the practical part, the spectrum of individual light sources is measured, from which the irradiance limits are calculated, according to which the source is assigned to the appropriate group of hazards.
|
|
|
Street Lighting Control
Kořenek, Jan ; Krbal, Michal (referee) ; Štěpánek, Jaroslav (advisor)
This bachelor thesis deals in a theoretical part with the origin of the light, his features and lighttechnical quantities. There are also characterized light sources, which are currently most used to control street lighting. There are further described basics of the street light and currently most used ways of street lighting control. Further part of this thesis is focused on practical control of different types of light sources and monitoring their parameters, such as luminous flux, power, efficiency or correlated colour temperature during voltage reduction. These light sources are high pressure sodium lamps, halogenid lamp, fluorescent lamp and high pressure mercury lamp. Main conclusion from measurements are several cross characteristics, where is possible to monitor behavior of the parameters during voltage reduction. The last part concerned about practical street lighting control in Bezděkov, which is a village located near Havlíčkův Brod. There was connected the dimmer. On the street was created net of points according to the standard. In these points were measured illuminance for voltage 230 V and then for lower voltages 210 V and 190 V. These values were processed and average and minimum value was compared with the value defined in the standard.
|
|
|
Use of modern inteligent wiring for building lighting
Hlinecký, Tomáš ; Bátora, Branislav (referee) ; Baxant, Petr (advisor)
This diploma thesis concerns with problematic of modern intelligent wiring systems in buildings, meanwhile presents their advantages against old classical wiring systems. Also deals with utilization and properties of modern components for regulation, switching and light controlling. The first part deals with light sources and possible ways how to control the power of individual luminary sources. The second part discuss about utilization of radio-frequency systems in new buildings and also in reconstructions. In the next part is described a possibility of bus system for controlling building illumination scope with focusing to control system Nikobus. The last part is concerned on technical-economical evaluation of intelligent wiring systems by various manufacturers according to specific requirements.
|
|
|
The effect of operating position of the light source on the photometric parameters
Šťastný, Jakub ; Štěpánek, Jaroslav (referee) ; Škoda, Jan (advisor)
The theses discusses how operating position and ambient temperature affect electric light sources. For the purposes of this theses, the analysis of light radiation, the description and the principle of taking measurements of light quantities are included. The work also contains the principle of function, construction and parameters of light sources. For each light source a hypothesized impact of the operating position of the light source and the impact of ambient temperature variation on radiated luminous flux are stated. For selected light sources a measurement of the impact of the operating position on the sources’ photometric parameters was taken. The output measurement data are being compared to the theoretical hypotheses. The conclusion of the thesis describes suggested recommendations for the operation of light sources based on both theoretical and practical parts of the thesis.
|
|
|
Photometry and spectroradiometry of LEDs
Vysoudil, Martin ; Škoda, Jan (referee) ; Drápela, Jiří (advisor)
This thesis deals with the processing of light technical parameters and performance of key LED chips for their applications in lighting systems. The aim is to create a laboratory model for measuring the qualitative and quantitative parameters of highly luminous light LED emitted depending on the angle, using a spherical integrator 0.3 m, goniometer and fiber spektroradiometr /luxmeters. Goniometer is designed using modular optomechanical parts company Thorlabs. Due to the current passing through the LED chips heat up considerably. To light LED chip parameters tested were not affected by heat from the chip is required to pay the heat generated by a passive radiator. Another part of this thesis is the reconstruction of an older model spherical integrator. Reconstruction must be undertaken so as to ensure sufficient cooling again tested LEDs. Light scattered in the ball of the integrator is led by the optical cable to the spektroradiometr that are subsequently recorded its parameters. The second element used to measure the light produced by the LED source is photocell. Spherical integrator must be appropriately modified to indicate the two measuring elements and also meet the standards of determining the correctness of measurement. At the end of the measurement results will be compared with catalog values provided by the manufacturer.
|
|
|
Ecology in lighting
Špidlík, Jan ; Štěpánek, Jaroslav (referee) ; Krbal, Michal (advisor)
This bachelor’s thesis is focused on introduction to ecology in lighting technology. There are briefly described individual light sources and chemical substance used in the manufacture of components. For clarity is amount of toxic mercury in each light source displayed in well-arranged picture. Thesis is also focused on the influence of lighting technology in the environment and impact on the ecosystem. Closer look is made upon influence of mercury on environment and human life and also overall influence of mining metals and its devastating consequences for ecosystem. This work also deals with post processing of light sources by collective systems.
|
|
|
Efficiency of Converting Electric Energy to Light in Current Light Sources
Krbal, Michal ; Pavelka, Tomáš (referee) ; Baxant, Petr (advisor)
The goal of this diploma’s thesis is to inform about present development of light sources, new technologies and about achieved parameters of these light sources. The thesis is mainly directed to describe efficiency of transformation electric energy to light at single types of light sources. There are described the concrete technical parameters of sources quoted by manufacturers and the contructional solution of single types of light sources. There is created a graphic comparation of electrotechnical and light parameters of the light sources.
|
|
|
A light source with ligh emmiting diode
Novák, Matyáš ; Mojrová, Barbora (referee) ; Boušek, Jaroslav (advisor)
This work starts with the basic description of function of light-emitting diode. It also describes the basic techniques of design of cooling housings for power LEDs and possibility of heat removal. In the theoretical part of this work is also described the possibility of heat dissipation regulating and the possibility of the power sources for LEDs. The practical part includes description of LED light source design and construction, using knowledge about cooling and power from theoretical part. The light source is designed for different kinds of power supplies for maximum flexibility of usage.
|
guest ::
